Click for more info and reviews of this TST TPMS Sensor:
https://www.etrailer.com/Accessories-...
Check out some similar TPMS Sensor options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-TST-...
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Signal Booster Repeater for the TST Tire Pressure Monitoring Systems. Now this single booster will strengthen and amplify the signal of your tire sensors to the display and helps eliminate electronic interference with your TST TPMS system. The signal booster repeater is included in every TST kit that you get. This one here, you can use it if you need to replace a lost or damaged signal booster. Basically, the signal booster improves performance of the tire pressure monitoring system, and this one here is designed to work with the kit.

Part number is TST507RV4C TST507RV6C, and also the ones that have the flow through sensors, which are the TST507FT4C and the TST507FT6C. To install, it's a very easy installation. Comes with the included hardware. They give you two self-tapping screws to attach it permanently. If you wanna move the repeater around, it does give you hook and loop fasteners here with some double face tape that you can attach it to.

Now you do want to connect it to 12 O power source that'll be constant while you're driving or towing, and you do wanna mount it on the front of the trailer facing the tow vehicle. And this is a waterproof construction for waterproof construction, so it will prevent damage from rain or wet roads. The red light right in the middle here, it indicates it's connected to power and operating correctly. The lead wire length on this is about 57 inches. You'll see at the very end it has a black and red wire, one's for a power one's for a ground, and it does have an inline fuse in it also.

The dimension on the booster repeater itself, we hold it this way and we do the height up to the top of the antenna. Bottom to the top. You can see is gonna be right about two and a half inches tall. The width, and we're gonna include the mounting tabs right at three inches and then the depth of it right about five eights inches deep. That's gonna do it for the review on the Signal Booster repeater for the TST Tire Pressure Monitoring Systems.

.