Click for more info and reviews of this TST TPMS Sensor:
https://www.etrailer.com/TPMS-Sensor/...
Check out some similar TPMS Sensor options:
https://www.etrailer.com/dept-pg-TPMS...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-TST-...
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this TST Tire Pressure Monitoring System with the color display and the four cap tire sensors. Now, this TPMS system will let you monitor your vehicle's tire pressure and temperature via this included display and it also works great with your motor home, your fifth wheel or your trailer. It will include everything laid out here on the table, the color display itself, the cradle mount, suction cup mount, 12 volt power adapter with the micro USB cable, the four cap sensors, the repeater, and then a nice installation manual that'll describe how this all goes together and how it operates. Now on the display, it is a color display, so I do want to show you that. We're gonna zoom in a little bit closer and show you this.

But basically, on the side here, you can see it has an on-and-off switch. So if we push that up and it comes on, you'll be able to see there's your color display and then it switches to the two boxes. The boxes show the temperature and the PSI. So there's nothing set on this yet. To set it, there's a button right here.

If you hold that set button down, you hear an audible alert. (device beeps) And then if you push it again you'll be able to see that it's flashing to show you to set the PSI. And then if you push it again, you can set the temperature you want it at and then it's showing you which tires it's flashing that you're setting it for. So it's pretty simple to operate. Go ahead and just turn that back off.

(throat clears) Now, this is a color wide screen monitor, so it provides early warning detection with visual and audible alerts. It'll help detect blowouts, significant pressure changes and tire temperatures exceeding 158 degrees. Does refresh automatically with new tire information about every five minutes. And you can preset on this monitor up to four separate vehicles or trailers. The multiple mounts we have here allow optimal monitor position.

This suction cup mount you can see, this will let you stick the monitor to your windshield or to your dashboard. And basically, you just put it to the back here, slide it up and it locks into place and you're all ready to go. So you can adjust it where you want it this way, loosen this up or down this way. And again, if you wanna use it on the dash, just flip it over and operate it that way. The other mount we have that they offer is the non-slip rubber cradle mount for your dash. Once you put that down, you can see it doesn't really slide. It's a non-slip. And then you can just take your monitor, push it right in there and holds it into place. Now, the four cap sensors right here, these are what'll go on your tire valve stems. This will check your tire pressure and temperature every 12 seconds. They are a brass construction so they're designed for use on rubber, steel, chrome or nickel valve stems and they're a very easy installation under your tire's valve stem. All you have to do is screw 'em on. Now, I happened to pull a valve stem here just to show you how they go on. I'll take our cap off and then all you do is just twist them and then just tighten them down until they snug up and then they're ready to go. Just pair 'em to your display and you're all ready to go. Now, another neat feature they do offer, if you're afraid somebody's just gonna unscrew 'em and take off with 'em, they do offer these locked up so you can lock it down. And the way you do that is put your lock nut on first all the way down, take your sensor, go ahead and put your sensor down and then just back your lock nut all the way back up against there. And then they give you these two wrenches, these end caps, and it's designed to go over the cap onto that nut, tighten it down and then it's tight. Nobody's gonna be able to just take 'em or unscrew 'em off. And then to remove it, just like that, loosen it and I'll let you remove the sensor. Now, they do sell. We do sell additional sensors. They're sold separately. You can monitor up to about 115 tires. Now, one thing I wanted to mention on the sensors. The sensors, they do have the battery in them, It's a standard CR2032 size battery and it lasts about one to one-and-a-half years. So if they wear out and you'd need to replace 'em, they give you the parts to replace it with. And again, you use your wrench, you just use the other end. And what you'll do is put it on there, just loosen that cap. And then once you get