Please open this video description to learn more about this printer.

I started with a V0.0 Kit from Aliexpress (now it's 0.1, which is better in any respect)*:
Formbot Voron V0.1 Kit (AliExpress) https://bit.ly/39kfWdC
LDO Voron V0.1 KIT (Caribou3D) https://bit.ly/3KBxqzL

Recommended Kits for bigger DIY printers:
Voron 2.4 Kit (AliExpress) kit bit.ly/3PklmWE
Voron Trident Kit (AliExpress) https://bit.ly/3yxMaNe

STL files, instructions and BOM:
https://247printing.gumroad.com/l/247...

Links @247printing:
Patreon:   / 247printing  
Instagram:   / 247printing  
Twitter:   / 247_printing  
Discord (under construction):   / discord  
Homepage with loads of info: incoming!

This is the fast and ultra high speed 3d print you voted for to be next on the channel and I added some updates to the printer meanwhile, which were in the CAD pipeline :)

Lot's of comments in the last videos were asking for a detailed model to be 3D printed ultra fast at 1000mm/s (as always: peak!) - I was confident to do it on this capable Voron 0 (V0 / Zero) including the awesome Klipper firmware and some hardware/software tweaking.

I chose the model of a Raspberry Pi holder for the Voron 0.0:
Lots of small details and 90° edges. Little overhangs.
The aim is not perfect quality, but 100% function printed ultra fast.

Many are asking for the release of my designs:
Please stay tuned, I'll do it properly with well tested parts and proper guides how to upgrade.
On YouTube and soon on our incoming homepage!

Table of content:
--------------------------------------------------
1. Products used
2. Print settings used
3. My modest video gear



1. Details on the upgrades/products - some affiliate links to keep the high expenses a bit lower:
---------------------------------------------------------------------------------------------------------------------------------------
All information about Voron (designer of the base printer V0):
https://www.vorondesign.com/

For years now, I use BigTreeTech/BIQU products - very much recommended:
(I was sponsored with an Octopus Board V1.1, TMC2209, 70W Heater and PT1000 thermistor)
Get the Octopus Board here:
https://bit.ly/31kKCrj

Hotend: Genuine Slice Engineering Mosquito Magnum:
At Slice Engineering (5% off with this link):
https://www.sliceengineering.com/247p...
At 3DJake:
https://tidd.ly/3jgkcx4

Heater block - awesome Volcomosq by Nitram, watch his video (order info in the description):
   • How did I end up with the VolcoMosq?  

Motors: OMC 14HS20-1504S @1.7A - Voron 0.1 specified:
https://www.omc-stepperonline.com/nem...

For stiffness and weight reduction I re-designed the X-gantry to be printed with the truly awesome PET CARBON FIBER by AzureFilm3D (prints very easy and is superior to ABS in every respect):
https://tidd.ly/3pc8Xtn

I bought a LDO Motors linear rail kit from Lecktor:
https://lecktor.com/en/v0-motion/751-...

Lubrication of the rails is done with WD40 specialist PTFE (lower friction):
https://amzn.to/2ZTE2rc

I use an E3D Hemera at bowden configuration:
https://amzn.to/2ZOTnZX
Bowden adapter:
https://amzn.to/3Ffo76I

Fans for external static cooling (sold out...):
https://www.mouser.de/ProductDetail/D...

Alternative 4028 fans, which are available, but not as crazy powerful (but surely sufficient):
https://s.click.aliexpress.com/e/_97e6Rl


2. Print settings in this preview video:
------------------------------------------------------------------------------------------------------------
Printed on ESUN ABS+ (silver)

Slicer: Idea Maker
Nozzle: 0.4mm
Layer Height: 0.1mm
Line width: 0.4mm
Max Volumetric flow: 40mm³/s

Firmware: Klipper on Mainsail
Requested speed: 1000mm/s (all features) / first layer: 200mm/s
Commanded acceleration: 30000mm/s²
Square corner velocity: 20mm/s
T_Bed: 105°C
T_Hotend: 305°C
Cooling speed: 20%-60% (on certain layers only)


3. My modest video gear
-------------------------------------------------------
iPhone 11 Pro: https://amzn.to/2VZYswJ
Smartphone video rig: https://amzn.to/3iriub5
GoPro Hero 9: https://amzn.to/2UZI9Q5
FLIR ONE PRO: https://amzn.to/2UWAe67
Similar to the soft boxes I use: https://amzn.to/3xRes2d
Similar to the tripod I use: https://amzn.to/2V1I6mw


#247printing
#JoinTheSpeed
#volcomosq
#3Dprinting
#VzSpeedCube
#SpeedBoatRace