In this video I cover the Voron 2.4, Trident, and briefly the V0 along with similarities, differences, and considerations. Voron is an open source printer, born out of RepRap. IMHO, it is one of the best quality printer you can build that has a large community behind it. Watch the video to learn which one would work best for you!

Voron Design - Link to all Build Docs & Info:
https://www.vorondesign.com/

My Voron 2.4 kit was from West3D.
West3d Voron Kits (including LDO):
https://west3d.com/GREGSMAKERCORNER

All Trident parts were provided by Boxxy Prints. Kit was provided by LDO.
Boxxy Prints (Recommended for parts, tell him I sent you!)
https://boxxyprints.com/?v=0a10a0b3e53b

Considering a Voron Trident?
Check out my LDO Trident Kit Review here:
   • LDO Voron Trident Kit Review  

See below if you'd like to skip around the video.

00:31My Voron 2.4 R2 Build
00:56 My Trident Build
01:40 Stealthburner Toolhead
01:56 Trident Touch Screen
02:00 Voron 2.4 Voron display
02:21 Voron 2.4 Flying Gantry
02:37 Trident Fixed Gantry
02:54 Voron 2.4 and Trident Bed Comparison
03:11 - Voron 2.4 and Trident Gantry Similarities
03:31 - Voron 2.4 and Trident Cable Chain Differences
03:44 - Voron 2.4 and Trident Z Motor Mounting Differences
03:59 - Trident Lead Screws
04:10 - Auto Leveling
04:20 - Voron 2.4 Quad Gantry Leveling
04:34 - Z Endstop for Z offset (Both Machines)
04:52 - Trident Z Tilt Leveling
05:15 - Auto Leveling Process & Differences
05:45 - Enclosure Panels (Same on Both Machines)
06:21 - Bottom Cooling (Same on Both Machines)
07:00 - Print Quality (Same on Both Machines, but some considerations)
08:08 - LGX Lite Extruder good for TPU (Mods for both machines)
09:16 - Preheating
09:59 - Print Speed Comparison
10:37 - Toolhead Considerations
11:17 - Build Considerations
12:44 - Popularity / Mainstream Support
13:05 - Serial Numbers
13:18 - Pricing Differences
13:32 - Kits
14:19 - Voron 0.1
15:58 - Printing on each machine
16:22 - Conclusion

Learn more about the Titanium Backers "theory" here:
https://github.com/tanaes/whopping_Vo...

Here is a video on how to install them:
   • Voron 2 4 Gantry Install, Titanium Ba...