If you want to make your vehicle feel like a proper sports car, the first aspect of any car that I would modify is the suspension. Ferraris, Porsches, and Lamborghinis do not feel sloppy around turns. They come well equipped with large sway bars, properly designed suspension, and that is all noticeable even at low speeds. Whether you take your car to the race track, you like driving down backroads, or you just want a predicable vehicle that can change direction if someone cuts you off, throwing some beefier sway bars on your car is no brainer.

Here is some simple logic as to why this is hands down the best suspension upgrade. The body roll your car has, the less snapback you will experience. That will give the driver more confidence as the vehicle will become more predictable. If the car is composed and predictable, you will be able to push your car harder, which then leads to faster lap times.

Another great thing about installing stiffer sway bars is that it will keep both of your tires more perpendicular to the ground which will help with traction. The more your tires are in contact with the pavement, the more grip you will have around a turn.

After purchasing these #HotchkisSportSuspension #SwayBars, I found some awesome looking billet sway bar brackets that are an incredible addition if you want to do this upgrade. These billet aluminum brackets have the same zerk fittings as the steel ones, however will be stiffer and won’t rust like the steel ones will. They are not a must, however are something to consider if you’re doing this upgrade. You can find a link below.

///// LINKS TO PRODUCTS👇 /////
Hotchkis Sway Bar Kits ▶︎ https://goo.gl/9Dvc8S
Hotchkis 370Z/G37 Sway Bar Kit ▶︎ https://amzn.to/2NvRB9Q
Hotchkis Billet Aluminum Sway Bar Brackets ▶︎ https://goo.gl/3JoVeq
Sway Bar Grease ▶︎ https://goo.gl/YG4Gka
Exhaust Hanger Pliers ▶︎ https://goo.gl/t2ZE7R
1/2” Torque Wrench ▶︎ https://goo.gl/6RrdsQ
DeWalt Impact Driver ▶︎ https://goo.gl/RgFfrN
MAP Torch and Tank ▶︎ https://goo.gl/hFhdpz
Digital Caliper ▶︎ https://goo.gl/Pd3pa7
Ultra-Low Profile Jack ▶︎ https://goo.gl/WThn14
Aluminum Jack Stands ▶︎ https://goo.gl/hVRNfC
Camera Used for this Video ▶︎ https://goo.gl/Tnxgj1


///// TORQUE SPECIFICATIONS 👇 /////
Front Sway Bar Bracket Nuts (4) [14mm socket] - 38 ft. lbs
Front End Link (2) [19mm open ended wrench & 17mm socket) - 62 ft. lbs
Rear Sway Bar Bracket Bolts (4) [14mm socket] - 33 ft. lbs
Rear End Link Nut (2) [19mm open ended wrench & 17mm socket]- 41 ft. lbs
Rear Diagonal Chassis Bracing Bolts (6) [12mm socket] - 24 ft. lbs
Wheel Lug Nut (20) [21mm socket] - 80 ft. lbs


///// STOCK VS. HOTCHKIS SPECIFICATIONS 👇 /////
Front Bar Diameter - 26.5 mm vs. 35.2 mm
Rear Bar Diameter - 24.9 mm vs. 29.7 mm
Rear Sway Bar - 1-way fixed vs. 3-way adjustable
Bushings - Rubber vs. Polyurethane
Brackets - Non-Greaseable vs. Greasable with zerk fitting

///// BECOME ONE OF THE BOYS BY FOLLOWING MY 👇 /////
YouTube Channel ▶︎    / milanmastracci  
Instagram ▶︎   / milmast  
Facebook Page ▶︎   / milanmastracci  


///// YOU CAN SEND ME STUFF HERE 👇 /////
MILAN MASTRACCI
PO BOX 30075 TOWN SQ. PO
FONTHILL, ONTARIO, CANADA
L0S 1E3


If you have any additional questions, feel free to send me an email at [email protected]. Be sure to tag me on Instagram @milmast so I can see what you guys are up to as well. Thank you so much for watching!!