3D PRINTED BENCHY AT 100% SCALE

🧱 MATERIAL
Purple PLA with Glitter (This is where the "oomph" comes from 🤪)
Print Temp: 200C
Bed: 50C

⚙️ SETTINGS
- Layer Height 0.25
- Line with 0.5
- 3 bottom layers
- 4 top layers
- Infill 10%
- 2 Walls
- Accel: 20,000mm/s^2
- Jerk: 800 mm/s
- Print Speed: Slicer 160mm/s * (280% printer control speed multiplier)

🔩 PRINTER DETAILS
- HOTEND: #NovaHotEnd https://3dpassion.com/nova
- MOTORS: NEMA 17 0.9 degree 48mm. E3D High Torque https://e3d-online.dozuki.com/c/High_...
FIND MORE AT ► https://www.hevort.com

🍺 SUPPORT ME ► https://www.paypal.com/donate?hosted_...
If you like my work and would like to support my efforts in making more open source 3D printing solutions, please consider a small donation. Thank you.

MirageC