Join us on this magical journey of excitement as we show you step-by-step how to install the Ironman 4x4 Raid Front Bumper on your 6th-Gen 2021+ Ford Bronco.

Get your Ironman 4x4 Raid Front Bumper for your 6th-Gen Ford Bronco here: https://ironman4x4america.com/raid-fr...

Chapter Selection:

0:00 Intro
0:18 Unpack your bumper and layout your parts
0:34 A note about adaptive cruise control
1:11 Remove front skidplate
1:33 Remove factory front bumper
3:28 Remove intercooler shroud and adaptive cruise sensor
4:40 Remove active aero louvers and remove wire harness from that assembly
7:46 Cut a gap in the radiator shroud for the wire harness to pass through and re-install active aero louver assembly
8:41 Set up the adaptive cruise sensor relocation bracket
13:48 Remove radiator top shroud
14:18 Unplug front camera and sprayer if equipped
14:54 Remove front grill
15:33 Remove radiator grill cover, fenders, lower front trim, and headlights
18:25 Remove top 2 louvers from grill cover and trim area for adaptive cruise sensor relocation
21:06 Enlarge hole on top core support for relocation bracket hardware
21:32 Re-install modified radiator grill cover
22:29 Re-locate hood release cable retainer clip
23:33 Install adaptive cruise sensor relocation bracket
24:57 Re-install headlights, lower trim, and fenders
26:17 Adaptive cruise sensor adjustment
26:53 Remove front camera and harness from front grill
27:44 Remove front parking sensors and harness from front bumper
29:09 Install parking sensors and harness into Ironman 4x4 Raid front bumper
31:02 Install LED fog lights and protective gravel guard plate
31:33 Assemble front camera relocation bracket
32:40 Install LED light bar
33:26 Install camera extension cable and sprayer hose
35:02 Install hoop to bumper shell
36:03 Install front plate bracket and winch fairlead
36:38 Remove factory nut plates from front frame horns
37:08 Install winch tray support brackets and recovery points
39:43 Install winch tray and winch
41:52 Install winch control box relocation bracket
43:39 Hang grill back on but leave loose
44:09 Install front bumper shell
45:26 Feed camera cable and sprayer hose back up and reconnect
46:35 Tighten grill hardware and reinstall the radiator top shroud
47:50 Reconnect bumper wire harness and set bumper position with pinning bolts
48:48 Re-install front skidplate
49:15 Conclusion

For additional installation support or if you have any questions please reach out to our customer service team. https://ironman4x4america.com/​