Instructions for assembly of a Teensy 4.1 microcontroller, the Teensy Audio shield, and connectors on a breadboard for a four-input analog application. #pjrc #teensy #arduino #touchsensor #proximitysensor

This project creates a four-track Teensy touch-sensitive system that plays audio clips or tracks as it senses proximity to capacitive sensors. The sensors are created using Adafruit Gemma-M0 boards.

The software library is available under the LGPL 3 license:

Hardware, installation, and Gemma-M0 code:
https://github.com/craig-james-author...

"Tactile" software library:
https://github.com/craig-james-author...

Arduino sketch "Touch.ino":
https://github.com/craig-james-author...

These last two repositories should go in your Arduino folder under libraries and sketches, respectively. Note that you should use Arduino 2.2.0 or later with the PJRC.com Teensy board plug-in. See the PJRC web site for configuration details.