https://3dp.rocks/lithophane/

Settings used for Outer Curve lithophane.

Model Settings:
Maximum Size - 150mm
Thickness - 2mm
Border - 4mm
Thinnest Layer - 0.8mm
Vectors Per Pixel - 10
Base/Stand Depth - 0
Curve - 0

Image Settings:
Positive Image
Mirror Image Off
Flip Image Off
Manual Refresh
Repeat X Count: 1
Repeat Y Count: 1
Mirror Repeat Off
Flip Repeat Off

Image preparation:
Crop your image to 2:3 (ratio)
Save image as .jpg less than 1mbs

Slicing settings for PolyTerra™ PLA Cotton White (Start with generic PLA settings):
Printing Temp: 225°C
Bwd Temp: 60°C
Extrusion Multiplier - 0.9 (90%)
Extrusion Width - 0.4
Shells/Perimeters - 3
Infill - 0%
Layer Height - 0.15mm
Allow single extrusion fill - (Internal 20%)

To purchase light, email: [email protected]
Kenwell Lighting, Model: 35954
Price: €9 (+ Shipping from the Netherlands)

.STL Files for Lightbox:
https://www.thingiverse.com/thing:488...

PolyTerra™ PLA:
https://polymaker.com/polyterra-pla-i...

.STEP Files for Lightbox:
https://www.dropbox.com/s/7s10dqgz8ys...