Look another project! 42' Chevy G506

linuxcnc - mesa vs printer port for closed loop control

Emco compact 5 pressurized oiling.. Paths through the saddle..

Emco compact 5 'side quest' - pressurized oiling!

An overwhelming shop tour.. The before.. hopefully.

Grandpa's Gingery mill

channel update

Emco update : Threading with single channel encoder or Printer still isn't dead part 10 (or so)

+/- 10 volts from the printer port. Spindle control work in progress..

X axis home testing. Printer port isn't dead!

Printer port isn't dead part mumble!

path following and you.. try 2... more ramblings..

CNC path following. you should be in control...

I got a D for effort! More non-circular boring - an actual application. (Emco lathe conversion)

Compact 5 (printer port isn't dead) update.. 3d printer edition..

Linuxcnc classicladder and Emco Turret. A case study in painful video creation.

first attempt at ladder for emco turret. no feedback.

Printer port isn't dead part 5. We found a turret! (and things are going to fit)

Outside wood furnace - fixed all the leaks! (hopefully) and laminar flow ASMR at the end..

The outside wood furnace made 30 years ago. It finally needs some work..

Printer port isn't dead part 4. Spindle encoder missing tooth index functionality. (saving 1 pin!)

The printer port isn't dead yet! part 3. new ball screw and 3d printed parts for test fit.

The printer port isn't dead yet! Part 2 Some mansplaining..

Tweeking the home made blade sharpener for the home made saw mill....

The printer port isn't dead yet! Closed loop servo control with Linuxcnc.

Balling! re-balling a Emco ball nut.

How I install Debian and Linuxcnc (Debian 10 Buster) Warts and all.

css and fpr - converted emco to linuxcnc and servos..

G70/71 turning cycle testing with linuxcnc. (playing with new 4 jaw)

Gearing up to thread on the old Nebel lathe... pun intended..