Bassin' Benz 🔊19,000 Watts ⚡️ Banging Sound System demo shut down by upset neighbor
YouTube Viewers YouTube Viewers
1.07M subscribers
64,843 views
0

 Published On Jan 7, 2024

visit: http://www.stevemeadedesigns.com/board and join our friendly, knowledgeable forum today! Learn a few things, teach a few things, have fun! We love car audio!

Shop car audio at my store: https://wccaraudio.com/ Fast shipping, GREAT service, & Quality products!

Brads 2000 MB CLK430 is over the top nice. There is so much going on I can only scratch the surface during the walk around. Below is the list of products that are in his trunk. This thing really sounds good! The bass carries like crazy, I heard him from so far away and it took him forever to pull into the driveway. Of course the neighbors about 200 yards away were not happy. I would say "Karen" but she was actually nice about it. So I will save that name for someone who deserves it. This is an industrial area, if i really want to play my system, I will. But I don't like to disturb people for too long so we shut it down. Check out the list below and thanks for watching if you did!


AutoTech Engineering, Competition Series CS400, 400A H.O. Alternator, Externally Regulated by a Brand X External Voltage Regulator. Wired in custom enclosure, set to 16.0V. Step down side (car) between 12.4-13.6.

192AH 14V SPIM Li-Ion Battery Bank with Custom Bussing and Link (Parallel) Bars, along with SHCA 2/0-4/0 inputs/outputs, made by ToolMaker Metal Works, with custom Battery enclosure, and COB IC LED’s it in a custom engraved Epoxy & Plexiglass top plate, Thanks go out to Bobby Gately!

3 X Limitless Lithium 500 Farad Super Cap Banks, in custom built “Cap Box”. (1500 Farad SuperCap Bank total).

3 X XS Power 993 Step Down modules linked in parallel in a custom battery enclosure, with Volt Meters on the input and output sides, temp controlled by an SMD TM-1, with push/pull fan cooling.

Head Unit: Stinger ELEV8, Linked Digitally to DSP Via Optical (Toslink) cable.

DSP - AudioControl DM-810.

2 x Ruthless Audio 8500.1 @ 1 Ohm each (Bass)

1 X Ruthless Audio 1500.4 (Running 6.5” Components & MidBass)

1 X JL Audio XD400.4 (Running Upper Mid’s & High’s)

6.75cf Custom Gately Audio ported enclosure.

4 X Gately Audio Relentless series V.3, 12D1’s, (All Subs Inverted, wired to 1 Ohm) in Rear Seat Delete setup.

2 Sets (4) DS18 Pro-FR5NEO 5.25" Midrange Driver sets, w/ 1” DS18 Silk Dome Tweeters. Kick panels & Rear of Doors.

1 x Sundown Audio SA-6.5CS V.3 Components. 6.5” Front of both Doors, Tweeters in the Sails.

2 X Skar Audio, EVL-1X65D4-V-LP 6.5” Low Profile MidBass ported enclosures behind each seat.

Custom “Gately Audio”, Linear Level Control (BASS) Knob, Drivers Seat 7’ cord length.

16 X SMD Ceramic ANL Fuses. (100-500A)

2 X SMD Single ANL Fuse Holder.

2 X SMD Single XL2 ANL Fuse Holder.

1 X SMD Double XL2 ANL Fuse Holder.

2 X SMD Triple XL2 “Triple Shot” ANL Fuse Holder.

1 X SMD SIX - XL2 “Six Shot”. (First one sold and autographed by Steve Meade at SMD HQ)

1 X SMD UB-8: Amp Grounding Bar.

2 X SMD UB-4: Alternator Bracket Ground Distribution. Front to Rear.

1 X SMD UB-2: Power distribution

1 X SMD VM-1 High Voltage Meter. Custom flush mounted into ashtray by @Colt_45_C10.

2 X SMD TM-1 Temperature Meter & Fan Control. (Rear Trunk Fans & Step Down Box)

1 X SMD Custom VU DIN and Bracket (Kindly custom made by Steve Meade himself) 1 side for Bass & 1 side for Mid’s and High’s.

1 X SMD Full Block, System Power distribution.

3 X 4” Low Profile Brushless directional Fan’s, + 2 X 3” Computer Fans for Battery Box Cooling. Amp/Battery/Trunk cooling, controlled by SMD TM-1.

1 X 4” Black Turbo Bilge Fan, under hood for Alternator cooling. (100A Ground Circuit Breaker to control On/Off)

Big 4+++.

Approximately 30’ of SHCA 4/0 OFC.

Approximately 70’ of SHCA 2/0 OFC.

Approximately 25’ of NVX 1/0 Tinned OFC.

Approximately 50’ of SHCA 1/0 OFC.

Approximately 150’ of Skar Audio 14 AWG OFC Speaker wire.

Approximately 30’ of SHCA 10 AWG OFC Speaker wire.

Approximately 25’ of SHCA 8 AWG OFC Speaker wire.

Signal cables: TosLink Optical Cable from Head Unit to DSP. SHCA Twisted RCA’s from the Processor to amplifiers, and to allow RCA Bass Knob function with Optical connection.


More photo's and clips of Brands Fifth Element MB project here   / fifth_element_916  

Follow the Gately Audio IG here   / gatelyaudio  

check out other amazing projects and products here http://www.gatelyaudio.com

And last but not least, don't forget to subscribe to MY channel!

For Business Inquiries: [email protected]

#mercedes #audio #bass

show more

Share/Embed