Part 2 of my outdoor table build. This is an industrial design. In today's video I will make the large metal legs with interconnecting rod. The legs will be cut from 100x50x6mm C channel then welded together. I make large metal nuts on the lathe complete with oversized washers. I will single point thread the end of the rods to accept the large nuts. Assemble and install the wooden top made in part 1.
Thanks for watching and hope you enjoy the video.

Cheers Mike

*** I had built a new camera mount which was an epic fail as you will see in this video. A bit of camera sway. Will build another system in next video. ***

Below is a link to the build of the wooden top.
   • Building a large metal and timber, in...  

Video Time stamps
00:00 Intro
00:53 Cutting steel legs on bandsaw
3:00 Cutting notched in steel legs
5:10 Tig welding steel legs
8:43 Showing my welding area
8:55 Go over finished legs
9:40 At the lathe making large nuts
15:07 Making large washers from 6mm plate
18:19 Single point threading cross members
23.05 Finished product

#industrial #table #industrialdesign #steel #outdoortable #steellegs #bbqtable #rustictable