Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ia/1ASHF00704

This video shows you how to install a new wheel hub and bearing on your 2008-2020 Dodge Grand Caravan. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2008 Dodge Grand Caravan
2009 Dodge Grand Caravan
2010 Dodge Grand Caravan
2011 Dodge Grand Caravan
2012 Dodge Grand Caravan
2013 Dodge Grand Caravan
2014 Dodge Grand Caravan
2015 Dodge Grand Caravan
2016 Dodge Grand Caravan
2017 Dodge Grand Caravan
2018 Dodge Grand Caravan
2019 Dodge Grand Caravan
2020 Dodge Grand Caravan

Tools you will need:
• Pry Bar http://1aau.to/o4E/1AXAA00020
• 10mm Socket http://1aau.to/obxu/1AXAA00017
• 15mm Socket http://1aau.to/obUb/1AXAA00015
• 19mm Socket http://1aau.to/oaxf/1AXAA00043
• 21mm Socket http://1aau.to/oaxf/1AXAA00043
• 32mm Socket http://1aau.to/odA/1AAST00003
• Brake Caliper Hanger http://1aau.to/ok6/1AXAA00439
• Trim Tool Set http://1aau.to/oaqe/1AXXX00006
• Ratchet http://1aau.to/obW4/1AXAA00016
• Socket Extensions http://1aau.to/obUb/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oaZP/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Gloves http://1aau.to/oaKr/1AXSS00048
• Safety Glasses
• Center Punch http://1aau.to/omU/1AXAA00055
• Floor Jack http://1aau.to/oao4/1AXAA00068
• Jack Stands http://1aau.to/oabq/1AXAA00065
• Large Hammer
• Wheel Chocks
• Wire Brush http://1aau.to/owt/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.