Works on most dead aerosol cans and allows you to get the last little bit out.
This is the Air Pressure fill/gauge I use http://amzn.to/2bHZQuv
Tire Valve stems delivered to your door: https://amzn.to/3h9G8Hi
BUY WD40 in BULK: https://amzn.to/3iqfyNt
The can will have a rating on the back(usually by the bar code). Most are DOT 2Q which means they are rated to at least 270psi before it will burst and designed for an operating pressure up to around 180psi @130F degrees. 99% of all air compressors put out a max of 120psi so you can't get close to the safe rating. Most compressors also have a regulator to turn down the pressure (50psi seams to be ample).
USA ratings At 130F degrees
No Code Minimum burst 210psi
DOT 2P Minimum burst 240psi
DOT 2Q Minimum burst 270psi
Make a refillable aerosol can: http://youtu.be/doLPFPeJ6JE
WD40 paint cans virtually any spray cans
Any information found on the site is offered for informational purposes only. Sixtyfiveford/channel owner is not liable or responsible for the availability, usefulness, or accuracy of the content made available or transmitted to this site. The information has not been verified by an outside source or authenticated either wholly or partially by Sixtyfiveford/channel owner. Sixtyfiveford/channel owner is not responsible or liable for any misfortune, hardships, or injury resulting from the use of this site. The video is for entertainment purposes only. Do not try this or anything else you see/view on this site.