Easy to follow step-by-step guide on how to do replace the front brake pads, rotors, calipers, wheel bearing seals, and how to re-grease the wheel bearing on your older model Tacomas. If you have any questions, drop them in the comments below and I'll get back to you.

Tools Used:
-Hood prop.
-Rubber mallet.
-Ball peen hammer.
-1/2in impact gun.
-14mm socket.
-3/8in ratchet.
-11mm socket.
-17mm wrench.
-8mm wrench.
-Water pump pliers.
-Side cutters.
-Small flat tip screwdriver.
-Brass punch.
-Phoenix brake flusher.
-Dust cap remover.
-Ceramic grease.
-Suction ball.
-Water bottle with hole in cap.
-Bearing packer.
-Wheel bearing grease.

Parts Used (all for the front):
-Brake pads (brand used: Duralast Gold part# DG433).
-Rotors (brand used: Duralast part# 31146).
-Calipers (brand used: Duralast part# 19-B2012 & 19-B2013).
-Wheel bearing seals (brand used: Duralast part# 1948).
-Dot3 brake fluid (brand used: Autozone).

If you want to see more of my videos makes sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!