Patterns and Knurling in Fusion 360 for 3D Printing // By the end of this video, you’ll know how to create knurling in Fusion 360. We’ll also take a look at two other ways to create patterns around a cylinder or curved surface.

TIMESTAMPS
00:48 | Setting up user parameters
01:21 | Creating a new component
02:12 | Creating an offset construction plane
02:30 | Using the coil command
04:46 | Mirroring the coil results
05:12 | Circular pattern the coil and mirror features
05:53 | Adding a chamfer to the end of the cylinder
06:43 | Adjusting the look of the knurling pattern
08:00 | Creating a new cylinder for pattern example
08:52 | Sketching fit point spline curvature
09:36 | Projecting the spline to the cylinder surface
10:50 | Cutting out the path with the loft command
11:59 | Circular pattern the loft and fillet features
14:00 | Creating a dot pattern on a cylinder
14:57 | Rectangular pattern the dot
15:37 | Circular pattern the dots

TUTORIAL RESOURCES
1. This tutorial's resource page ➞ https://ProductDesignOnline.com/17
2. View my checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist
3. Join us on Patreon ➞   / productdesignonline  

TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist

SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ http://bit.ly/sub-right-now
________________________________

MY PREMIUM COURSES
2 Months FREE ➞ http://bit.ly/courses-free

DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.

—
#Fusion360 #ProductDesignOnline #3dPrinting