9 Lines of code are all you need to get started. But they're also what you need to really understand, if you're planning on being a knowledgeable CNC programmer.
In this Tip of the Day, Mark shows us where to START and where to go after we've got those first 9 lines under our belts.

You can find all of Mark's bonus content for the video here:
https://www.haascnc.com/video/Video-B...

Mark mentions other videos that are related to the material in this video. Here are the links to those videos:
Set Work Offsets Manually:    • How to: Set a work offset with an edg...  
Set Work Offsets with Probe:    • Set Work Offsets in Seconds – Haas Au...  
Set Tool and Work Z Offsets:    • How to: Set Tool Length and Work Offs...  
Set Tool Offsets with Probe:    • Tool Offsets Explained – Haas Automat...  
Complete Part Setup:    • Make a Part From Start to Finish; Mar...  

Don’t miss any TIP-OF-THE-DAY videos. Click here http://ow.ly/s28l30mTiUo to join our email list!

If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!

Follow Haas:
Facebook:   / haasautomationinc  
Instagram:   / haas_automation  
Twitter:   / haas_automation  
LinkedIn:   / haas-automation