How to install the cover:
1. Remove the bolt from the passenger side with a 12mm socket head.
2. Fold the cover until it rests on the last section of the tri fold.
3. Latch the straps to secure the Tonneau cover so that it does not unfolded.
4. Pull the latch release on the driver side that will release the Tonneau cover from the bed of the truck.
5. Remove the bed side covers, simply pull up on the plastic and work your way down
6. Remove the plastic covers that cover the mounting brackets
7. Remove the bolts attaching the brackets to the bed side
8. Remove the center alignment piece
9. Place all hardware securely in a bag, and store the Tonneau cover in a safe location

Some things to keep in mind:
1. Use WD40 or some kind of lubricate on the bolts of the mounting brackets due to the fact there might be rust in the holes of the bed sides.
2. Make sure you press firmly on the bed side as to not strip the bolts