Building a removable plate for the saw itself, removable inserts for the blade, and fine-tuning the saw. The removable plate could be used to replace the saw with other tools in the future (like a router or a jigsaw), or replaced with a thinner plate that will allow more depth of cut.

I made a mistake in the video at 12:56, as I should have divided by 4 and not by 5. This means that the error is of 0.00877 degrees and not 0.000122 (which isn't correct even when dividing by 5)

Detailed information about this project: http://ideasketchbuild.com/homemade-t...

The rest of the videos in this homemade table saw series:
1. Building and aligning the fence:    • Homemade Table Saw - 1: Fence Build a...  
2. Cutting the miter slots:    • Homemade Table Saw - 2: Miter Slots  
3. Building a crosscut sled:    • Homemade Table Saw - 3: Crosscut Sled...  
4. Removable insert and fine-tuning (this video)

More about my "drill press": http://ideasketchbuild.com/building-a...

Music: "Wallpaper" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...

==================================================

For the latest videos and updates, be sure to like our facebook page:
  / ideasketchbuild  

Visit us for more projects: http://ideasketchbuild.com