🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
This was my first time using my new DJI Goggles 2 and one if the first opportunities ive had to really let rip with the Zcon Twin on some low and fast flying… weather has been shocking here for a while now, even this flight narrowly avoided the rain which you might spot in the distance on this video. The image in the Goggle 2 with the O3 really is stunning! If only there was less complication and confusion around the DJI gear as it really has by far the best image quality.
Being critical of my own flying, I definitely could have gotten lower in places but its been a while since I’ve flown and this was the first time with the new goggles (with lower gain antennas than i'm used to). Hopefully still an enjoyable watch.

☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► http://tiny.cc/BuyAdamGaCoffee

🔵 Follow me on my Facebook page for updates, build logs, random pictures & vid clips that don't make it to YouTube:   / adamgdoesfpv  

📷 Follow me on Instagram @adamgdoesfpv ► http://tiny.cc/AdamGonInstagram

Sites I get my awesome FPV goodies from:
✅ Banggood ► http://tiny.cc/BanggoodFPV
✅ RMRC ► http://tiny.cc/RMRC
✅ AtomRC ► http://tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► http://tiny.cc/Amazon-FPV
✅ HobbyKing ► http://tiny.cc/HobbyKing

========ZCon Setup========

In the Air:
-56" Ritewing ZCon Twin ► Only available if you email Chris at Ritewing directly: [email protected]
-DJI O3 Digital transmitter and Camera ► http://tiny.cc/DJI-O3
-Sandisk 256gb V30 Micro SD for onboard 4k60f recording ► http://tiny.cc/Sandisk-256gb-V30
-2 x TrueRC Singularity antennas on the O3 ► http://tiny.cc/Singularity-72mm
-Matek H734 WLITE Flight controller (Running iNav6) ► http://tiny.cc/MatekH743wlite
-2 x Badass 2310 1680kv motor ► http://tiny.cc/Badass-2310-1680
-APC 6x4e and 6x4ep ► http://tiny.cc/APC-6x4
-Hitec HS225MG Servos ► http://tiny.cc/iiww8y
-2 x Little Bee 50a BLHeli32 ESC ► http://tiny.cc/LittleBee50a
-Tiny GPS Rx ► http://tiny.cc/220GPS
-TBS Crossfire Nano Rx ► http://tiny.cc/TBS-Nano-Rx
-Prodrone 868 tuned Dipole antenna ► http://tiny.cc/Tuned-dipole-868
-2 x 4,000mAh 5S in parallel ► http://tiny.cc/5S-lipo
-Red COB LED's ► http://tiny.cc/COB-LEDs

On me:
-DJI Goggles 2 ► http://tiny.cc/DJI-Goggles-2
-TrueRC X-AIR 5.8 MK II Pair for Goggles 2 ► http://tiny.cc/X-Air-Mk-II
-Sandisk 64gb V30 Micro SD for goggle DVR ► UK Link: http://tiny.cc/SanDiskV30UK - USA Link: http://tiny.cc/SanDiskV30USA
-TX16s Transmitter ► http://tiny.cc/Radiomaster-TX16s
-Crossfire Micro Tx V2 ► http://tiny.cc/TBS-Crossfire-TX16s


========3D Printed Parts========

Electronics bay tray ► https://www.thingiverse.com/thing:600...
Nose to hold DJO O3 ► https://www.thingiverse.com/thing:600...
Skid ► http://tiny.cc/Skid
Wall mounting hooks designed specifically for this wing (My design) ► http://tiny.cc/ZConWallHook

========3D Printing Equipment========

-3D Printer ► http://tiny.cc/FlSun-Q5
-PLA filament ► http://tiny.cc/EryonePLA
-TPU filament ► http://tiny.cc/SainsmartTPU
-PETG filament ► http://tiny.cc/SainsmartPETG
-Digital Calliper ► http://tiny.cc/DigitalCalliper

========Build equipment========

-E6000 glue ► http://tiny.cc/E6000Glue
-Soldering Iron ► http://tiny.cc/Soldering-Iron
-Laminating Iron ► http://tiny.cc/LaminatingIron
-Laminate ► http://tiny.cc/laminate
-Hot glue gun ► http://tiny.cc/HotGlueGun
-Foam Cutting Tool ► http://tiny.cc/vxgv0y
-Heat Gun ► http://tiny.cc/AdjustableHeatGun2000w
-Watt Meter ► http://tiny.cc/WattMeter
-3M90 spray adhesive ► http://tiny.cc/3M90adhesivel