Welcome along to the FL Sun Speeder Pad first look and setup of my v400 and SR 3D Printers.

A quick thank you to the good people over at http://www.pcbway.com for their ongoing support and sponsorship of this video.

Flsun's Speeder Pad is an easy-to-use 7 inch display with pre-installed Klipper firmware and 1GB + 16GB storage. With the Speeder Pad, you can not only increase the prin speed of your 3D printer by 2 to 5 times but also monitor the printing processes in real-time and film exciting time lapses. All this with outstanding quality!

In addition to operation via the integrated touch screen, remote use via the web user interface on a PC is also possible: All you have to do is establish a LAN connection. Of course, you can also access the pad via WiFi! Up to three printers can be controlled simultaneously with the pad! If that's not fantastic, then we don't know what is!

The efficient Speeder Pad is compatible with almost every FDM printer: 9 printer types are configured for the pad as standard, additional extensions are possible. The pre-installed Klipper firmware can be upgraded both online and offline using a U disk or SD card.

Link to buying this item:
https://flsun3d.com/products/speeder-pad

Link to the facebook group:
  / 2664839700313412  

Link for my config files:
https://www.dropbox.com/scl/fo/3ipwpb...

Cyril Guislain's Github page **https://github.com/Guilouz/Klipper-Fl...

Link to Klipper : https://www.klipper3d.org/

Videos to also watch:

Nero 3D:    • Klipper 3d Printer Firmware - What is...  

Teaching Tech:    • How to convert to Klipper firmware: 3...  

Chris's Basement:    • Klipper 3D Printer Firmware Install -...  




Socials:
www.instagram.com/therealsamprentice
www.twitter.com/samprentice
   / therealsamprentice​