Update!!!!!! 1/24/24 The ground side of the trans break needs to go to ground also one side of the trans break button needs to go to ground!!!!!! They do not need to be wired together they should both go to ground. This is how I wired the S10 trans brake and bump buttons. I got the diagram from the sloppy wiki. This is not the only way to wire this up but it’s how I did it.


Sloppy wiki
https://sites.google.com/site/sloppyw...


Devin vanderhoof
   • Holley Efi Staging setup.  Both Termi...  

Burn down
   • Wiring A Transbrake In The Maliboom  

Blaster builds
   • Holley Terminator Trans Brake and Bum...