I show how to overhaul a cup and cone hub on a rear bicycle wheel. I take apart the hub, clean all the parts, install new ball bearings, repack the races with marine grease, reassemble the hub and adjust the cones. I also show removing and install the freewheel.

Most front hubs use ten 3/16" balls on each side; Most rear hubs use nine 1/4" on each side.

▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy

👍 And please give my video a thumbs up 👍

▶FACEBOOK.com/RJTheBikeGuy
  / rjthebikeguy  

▶TOOLS
http://www.rjthebikeguy.com/tools

▶SHIRTS
http://bit.ly/RJBikeGuyShirts

▶WEBPAGE
http://www.RJTheBikeGuy.com