Welcome to the description section on this video.
This video covers some of the most important things that you should consider before landing the drone at a new Home Point Location.
Make Sure You Read The Full Description On This Particular Video,
The Most Important thing to consider before landing the drone somewhere away from you is to find out if there is a clear line of sight between the drone and controller, By Clear Line of Sight I mean that the drone should be visible at flight path end from the controller end, It doesn't matter if you can see it with the naked eyes or not but there must be a visible link between the drone and controller.
When Landing the Drone at a new Home Point make sure the landing surface beneath the drone is flat and not irregular. Takeoff from an irregular surface is almost impossible for small drone like Dji Mini 3 Pro with small legs. The propellers always hit the ground or rocks which causes power failure and failed takeoff.
Make sure you have more then 50% battery left on your drone when landing at a new home point, if anything goes wrong you can adjust your controller location and there will still be life left on your drone to give you a steady takeoff.
You can actually extend the 500m height on Your Drone from a new HomePoint to go above 500m but be careful as in this video you will see if there is no connection between the aircraft and the controller you will have to go by yourself and collect the drone.
Dji Mini 3 Pro Turns off automatically to cool itself after sometime when it is sitting idle and it is something to consider. If you land your drone at a new Home Point location, make sure you don't let Dji Mini 3 Pro Sit there for longer periods of time as it will turn off automatically and cause signal interruption.
There are two Types of Signal Transmissions available 2.4Ghz and 5.8Ghz for the drones, 5.8Ghz works good In short range while 2.4Ghz works good in long range but you will be better off by keeping the transmissions on dual channels as the drone will automatically change to the preferred frequency channel in the transmission section on Dji FlyApp.
Make sure you are running the latest firmware updates on both the drone and controller to avoid any bugs and glitches during the flight.
That's all here for today, Thank you for reading and all the best.

---------------------

The apps that i used to edit my videos are listed below

1 - Videoleap (Premium)
VideoLeap IOS Link 👇🏼
https://apps.apple.com/pk/app/videole...

VideoLeap Android Link 👇🏼
https://com-lightricks-videoleap.en.u...

Other Apps i use 👇🏼
2 - Power Director
3 - Snapseed
4 - Photoleap
5 - Photoroom
6 - Splice
7 - LumaFusion
8 - Epidemic Sound

Sound Track & SFX Used From StoryBlocks (LumaFusion)

These apps mentioned above are available on smartphones and are easy to use.

---------------------

Dji Official Osmo Mobile 6 Link 👇🏼

https://www.dji.com/mobile/osmo-mobile-6

Dji Pakistan Osmo Mobile Link 👇🏼

https://www.w3shopping.com/products/d...

Dji Mini 3 Pro Link 👇🏼

https://www.dji.com/mobile/mini-3-pro

Dji Mini 3 Pro Stickers 👇🏼

PKR2,052 30％ Off | Drone PVC Stickers For Mini 3 Pro Protective Film Waterproof Remote Decals Full Cover Skin For DJI Mini 3 Pro Accessories
https://a.aliexpress.com/_m0fw7ws


---------------------

below are the Links to my social media accounts,
Come say Hi to me 😍

Instagram@FarhaanManan

Twitter@FARHAN__MANAN

---------------------

I landed DJI Mini 3 Pro 2.7KM Away AT 235m High on Mountain

#djimini3pro #djiglobal #dji #djimavicmini