Diffuser Selection | How to Design a Good Air Terminal
Click here for full course 👉https://www.augmintech.com/

🔴 An air terminal is a device that is used to regulate the volume of conditioned primary air from the central air handling unit to the conditioned space
🔴Dampers may or may not be installed in air terminals
🔴Air terminals are located in the conditioned space
🔴In cold climates, perimeter floor outlets are generally preferred
🔴In hot climates, ceiling diffusers or high wall outlets that discharge air parallel to the ceiling are most suitable to use
🔴In moderate climates, outlet location is less critical
🔴They are generally installed near interior walls due to the following advantages
🔴smaller duct lengths (decreasing costs)
reduced thermal losses (if ducts are located outside the conditioned space)
reduced blower requirements
🔴The distance between supply registers and exhaust vents should be kept as large as possible to prevent supply air from being swept directly up by kitchen, bathroom, or other exhaust fans
🔴Location of exhaust vents: They are located near or at the ceiling level to collect the warm air, odours, smoke and fumes

✅To learn about window AC using animation, kindly follow below link
https://bit.ly/3xAA2aO

✅To learn how to read psychrometric chart, kindly follow below link
https://bit.ly/3k5kDeR

✅To learn about COOLING LOAD CALCULATION USING EXCEL FORM (PART 1), click on the below link
https://bit.ly/2T3AjnT

_________________________________________________________________________
follow us on:-
facebook: https://bit.ly/3hucj6L
Linkedin: https://bit.ly/3r9gZSH
_________________________________________________________________________
If you watched this video and scrolled to the bottom and are reading this I would love to hear from you.

If you have any questions, give me a shout on social media & I'll try and answer all the questions you might have.

Thanks for watching and I’ll see you next time!