Hey folks! Just some recent footage of my newest crawler. A bully 2 MOA kit.

Parts list -
Bully 2 - https://tinyurl.com/2fxxtbn8

Team Brood Riot S 1300kv motors - https://tinyurl.com/2f3s6rc7 (with custom printed motor guards from Negative G)

Wraith 32 (drone) escs flashed with am32 - https://tinyurl.com/ycyd459s

5v bec for receiver - https://tinyurl.com/np79f7dx

Flash Hobby 50kg 14v servo - https://tinyurl.com/cdxnhmrz

Long servo horn - https://tinyurl.com/mu867kha (had to use this to get full throw back after swapping to the dlux knuckles)

Dluxfab brass knuckles with carbon "proper ackerman" arms - https://dluxfab.com/Knuckles-Dlux-p83...

Dravtech "short" shocks with no spacer and soft springs - https://tinyurl.com/ym4uv7hu

2.2 carbon beadlock wheels - https://tinyurl.com/2ubvxtrm

Proline Ibex Tires in Predator - https://tinyurl.com/4fuhr2km

CI 5.5" Dual stage foam - https://tinyurl.com/58xyjfhe


A quick build tip for the kit - on the rear links swap the long rod ends onto the upper rods to clock the rear axle back. This gives the rear motor more break over clearance. You may need to play with the lower rod end lengths to allow the upper links to clear the gear box.

Radio I'm using is a DX5r Pro. The beeps you hear is me shutting off the rear motor for dig.