*Check out the tools we used below. If the video was helpful, please give it a "thumbs up" and consider subscribing to the channel.*

This video goes over how to clean or replace a battery on a 2017 Chrysler Pacifica with a 3.6 motor. This process should be the same for any 2017-2021 Chrysler Pacifica with a 3.6. The Pacifica was redesigned in 2017, which was a replacement for Chrysler’s popular Town and Country minivan. Each vehicle has a manufactured recommendation on the cold cranking amps (CCA) required to start the vehicle on a cold day. If your vehicle comes with a 600 cranking amp battery, you can use a battery that has higher cranking amps if it fits into your vehicle. More power is always better! In colder climates, a battery can last five years or longer, but in hotter climates, a car battery typically lasts only three years. Fully charged batteries should read 12.6 volts or above. If the car is running, the number should be between 13.7 and 14.7 for a properly functioning battery. Some signs that your battery is starting to fail are slow or no cranking, dim lights, unusual electrical issues, and of course a warning light on the car's dashboard symbolizing a battery. Car batteries basically start the vehicle. Once started, the alternator takes over and supplies the power to the vehicle and recharges the battery, but at idle the battery may supply some power to the vehicle accessories that are on. Batteries come in group sizes that are designated to fit certain vehicles. This Chrysler takes a H7 group size which is something that is predetermined by the manufacturer. It is always a good idea to install a battery with a higher CCA rating since it will usually last longer and provide better performance in tougher climate conditions. When purchasing a battery you must make sure that it is the correct battery for your car per the manufacturer's recommended specification for the vehicle.


Tools needed :

Socket Set -- -- https://amzn.to/3ELvQLU
Screwdriver Set -- -- https://amzn.to/3IodzUc
Battery Cleaner -- -- https://amzn.to/3owI9U5
Battery Protector -- -- https://amzn.to/3dpKVnm
Hand Cleaner -- -- https://amzn.to/3dmnY4I
Rubber Gloves -- -- https://amzn.to/3oo997V

Parts:

Battery -- -- https://amzn.to/3LtSUlL

These are the tools we used or something that was similar. There are many manufacturers and various prices. It's a good idea to buy the better tool with the best warranty and easiest exchange in case of tool failure.



Disclaimer:

The Auto Teacher assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. The Auto Teacher recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 40 years working on cars. We do not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault and not The Auto Teacher.