Some images contained in this video are copyright CBS Studios.

This project took over four years, mostly due to delays. Finally I have the object of my childhood dreams and I hope you can dream along with me!

Thank you notSpock (integration of the Moire GIF and IR Camera into the Clue) and CompaniaHill (created the Moire pattern GIF) and others from the Fleet Workshop for all the help on this project!

The PyPortal and Itsy Bitsy were programmed using CircuitPython and the Clue used Arduino IDE. All the code for this project are available on my GitHub site, https://github.com/oldblackcrow.

My website is http://www.brianmross.com
If you would like the code and some instructions for this project, visit my GitHub page at http://github.com/oldblackcrow

For the build, I used:

* Diamond Select Tricorder – good luck finding one now… sorry!

* Aluminum pieces from Russell Harrell (https://russell-harrell.square.site/)

* Adafruit SGP30 (https://www.adafruit.com/product/3709)

* Adafruit ItsyBitsy nRF52840 Express - Bluetooth LE (https://www.adafruit.com/product/4481)

* 3000mAh Battery (https://www.amazon.com/AKZYTUE-3000mA...) Be sure to check polarity! I had to swap the wires so they did not fry the MiniBoost!

* Adafruit MiniBoost 5V @ 1A - TPS61023 (https://www.adafruit.com/product/4654)

* Adafruit PyPortal Pynt - CircuitPython Powered Internet Display - 2.4" TFT (https://www.adafruit.com/product/4465)

* Adafruit CLUE - nRF52840 Express with Bluetooth LE (https://www.adafruit.com/product/4500)

* Garmin LIDAR-Lite Optical Distance LED Sensor - V4 (https://www.adafruit.com/product/4441)

* Adafruit AMG8833 IR Thermal Camera Breakout - STEMMA QT (https://www.adafruit.com/product/3538)

* ALUMINUM 6061 FLAT BAR (https://www.amazon.com/Pieces-ALUMINU...)

* 6061 Aluminum Round Bar, 1 Inch Diameter (https://www.amazon.com/RMP-Aluminum-D...)

* Panel Mount USB Cable - A Male to A Female (https://www.adafruit.com/product/908)