Hi guys, so i have been doing resin printing since 2016 and now i finally find a budget printer that could match some of expensive resin printer that i have in terms of detail.
Keep in mind that it is a budget printer, so some flaws are to be expected before i purchase this printer.
for now i am not using this printer to do production work, but mostly just for fun.
so i share with you all Sonic Mini 4k problem and troubleshooting that i manage so far.

Resin that i am using is Esun Standard Resin Skin color
my setting is
bottom layer 4
bottom exposure 6
normal layer 2
lift distance 6
lift speed 80
retract speed 80
light-off delay 11

if you want to use screen guard, look up for ipad anti glare / matt screen guard.

here's link to the custom firmware gcode that i use from Mihkel Kaarma
  / 1880854178746407  

kindly support my channel   / dennyswang  

Checkout Phrozen Website for Phrozen printer
https://phrozen3d.com/?aff=98

If you in Indonessia, you can buy phrozen printer at jd.id here :
https://invol.co/cl766wm

If you in Indonesia, you can buy Phrozen printer at tokopedia here :
https://invol.co/cl766td

If you are in Indonesia, you can buy NFEP at tokopedia here
https://invol.co/cl766qq

#3dprinting #3dprinter #phrozen

If you interested to check my other work
Here my social media
FB :   / nobodycustom  
FB :   / 3dmikron  
IG :   / dennys_wang