Hanging Bird Feeder

Either one of these glues will work
Fuze it (All Surface) interior/exterior Liquid Nails
Loctite (Clear Silicone) Waterproof Sealant

1 tea cup
1 saucer (plastic)
2 plastic coated galvanized wire
Drill w/ bit
wire cutters

Description:
00:19 Step 1: Drill 4 holes into your PLASTIC saucer.
00:53 Step 2: Glue tea cup to your saucer.
01:05 Note: let the glue dry for 24 hours.
01:13 Step 3: Cut 2 lengths of wire w/ your wire cutters.
Cut the length you want to hang your bird feeder.
01:31 Step 4: loop the wire through the holes in your
saucer and hang your tea cup and saucer bird feeder.

Enjoy!
*********************************************
In-Ground w/Pole Tea Cup & Saucer Bird Feeder

Either one of these glues will work
Fuze it (All Surface) interior/exterior Liquid Nails
Loctite (Clear Silicone) Waterproof Sealant

1 chair tip 7/8"
1 tea cup
1 saucer
1 broom handle from the Dollar Tree
Spray Paint



Description:
02:07 Step 1: Spray Paint broom handle
02:21 Step 2: Put glue on bottom of chair tip. Then place
the chair tip to the bottom of your saucer.
02:48 Step 3: Put glue on the bottom of your tea cup. Then
place the bottom of your tea cup in the center of
your saucer.
03:12 Note: let step 2 & 3 dry 24 hours.
03:21 Step 4: Put the chair tip w/ the tea cup and saucer
attached, onto the tip of your broom handle.
03:30 Step 5: Find a place in your garden to put your tea cup
and saucer bird feeder.

Enjoy!

***Let us know how you like this short format. Would you prefer something longer with Angie speaking or do you prefer this abbreviated demonstration? Comment below. Thanks******

For more information about the library,
https://www.lakewalesfl.gov/309/Library
  / lakewalespubliclibrary