If you want to buy press brake punches and dies, you can check the details below:
https://artizono.com/press-brake-tool...

And you can check out the below article to learn more about press brake dies: https://www.machinemfg.com/press-brak...

Besides, the following post will help you know every detail about the press brake machine:
https://www.machinemfg.com/press-brak...

A press brake is a machine tool for bending sheet and plate material, most commonly sheet metal. It forms predetermined bends by clamping the workpiece between a matching punch and die.

In general, the press brake die can be divided into the upper die, the lower die, guide rail, lower die base, etc. These dies have a wide range of versatility, most of them can be fabricated.

The different dies should be used for fabricating different workpieces. You need to know the fabrication parameters of the press brake machine as well as the die very well, then it is possible for you to choose the right press brake die to match each other.

Press brakes toolings material: Cr12Mo1v1,42CrMo, T10a

Hardening: HRC: 52 ° -60 °
Tolerance: ±.002
Standard length: 835mm, 800mm, 550mm
(Standard press brake toolings in stock, non - standard bending machine mold can be customized according to customer drawings)

The dies include: offset die, concentric lower die, upper die, lower die, composite forming mold, etc.

The selection of press brake toolings mainly adopts T8, T10 steel, and some better materials such as 42CrMo. 42CrMo is a high-strength alloy quenched and tempered steel, with high strength and good toughness, can work below 500 degrees. It requires high strength, high toughness and good wear resistance.