In this video Andrew Donkin shows you how to make a simple portable wooden chair. You can use this chair at the beach, braai area or during camping.

View products and measurements here: http://bit.ly/31FT0g2
Steps
1. Cut all timber lengths to size at Builders.
2. Glue & Clamp 2 legs together as shown and allow to cure overnight. Repeat for all 4 legs
3. Layout your pieces and drill pilot holes as per the diagram.
4. Screw together as shown ensuring application of wood glue between mating surfaces.
5. Fill the holes with wood filler and allow to dry.
6. Sand the timber with a 100 grit paper to remove any sharp edges and splinters.
7. Seal the timber with Wood Sealer. I used Woodoc 50 exterior sealer.
8. That’s it. Enjoy.