Published On Oct 7, 2023
#chickencoop #diychickencoop #diy #oldenglishgamebantam #oldenglishbantam
Decided that the old Design was just way to big for the Bantams, so built them a new design, I'm always looking to improve my chickens well being in any way I can, so this is just another way I was able to
Materials list
20-2x4x8
5-2x4x12 (these will make your legs and door braces, cut at 65 inches, makes 10 boards)
3ftx50ft roll of wire
4-hinges
10-6ft sheets of tin (8 for your sides and roof, and 2 for the center wall, you'll cut 1 in half)
2- 8ft sheets of tin (these are for the back wall)
staples for attaching the wire
roofing screws for attaching the tin
screws for connecting boards, I recommend #9x3 inch deck screws, and of course 2 1/2 inch pocket screws if you use a pocket hole jig setup
1-2x2x8 (cut into 6 inch pieces for the outside and inside latch)