Headlight: https://geni.us/C-Max_Headlight
High-Beam: https://geni.us/C-MAX-High-Beam
*Use Discount Code 'DansWay' for 15% off from Auxito.com

Other Replacement Bulbs:
Front Turn Signal: https://geni.us/Turn_Bi-Color_W-Resitr
Front Side Marker Light: https://geni.us/Auxito_Amber_194
Front Fog-Light Yellow: https://geni.us/Ausito_fog_light_yelo
Front Fog-Light White: https://geni.us/Auxito_Fog_Light_White

Rear Brake LEDs: https://geni.us/Auxito_Brake_7443
Rear Turn Signal LEDs: https://geni.us/TurnSignal_ResistorLED
Rear Running Light LEDs: https://geni.us/Auxito_1157_Red
Rear Backup LEDs: https://geni.us/Auxito_White_921

Today I replaced the headlight and high-beam bulbs with LEDs on my Ford C-Max Energi Hybrid. The process is easy enough for anyone to follow along.

WARNING: LEDs don't seem to work on the early 2013 build of the C-Max (before 7/8/13), so if you have a 2013, please check the build date. Needs to be later in 2013 because they changed something about the headlight circuit after that...

If you get blinking/flashing, then I suggest adding ballast resistors to increase the current drawn from the bulbs: Hyper-Flash Load Resistors: https://geni.us/6ohm-Anti-Blink

TOOLS:
Ratcheting Wrenches: https://amzn.to/3IbQsLM
Torx Tip Set: https://amzn.to/33QARTb

The links above are Associate affiliated which means that without costing you a dime, I get a few dimes when you use these links.

Thanks so much for the support!
Dan

Contents:
0:00 - Introduction
1:05 - Fixture Removal
4:24 - Bulb Replacement