FOR ENGISH SUBS CHECK MY SECOND CHANNEL    / abcustomsworldwide  

DIY HYDRAULIC PRESS BRAKE full build

With this yet another new compilation video!
I recorded this video more than a year ago in the previeus workshop.

As a hobbyist it is quite difficult to neatly bend steel, and a professional press brake is very expensive. Delivery times at metal setting houses are often high, so you want to be able to do it yourself.

Here's the ultimate solution!

I built this press brake from UNP 100 profiles because I did not have tube profiles in stock, but a 100x100x10 tube could also have been done well.

The bending length is 750mm and the pressing force is 12 tons.
I made a 45mm wide bottom mold with which I can convert a 4mm thick plate at right angles over the entire length, and a narrower 15mm for 2mm plate.

There is an adjustable depth stop on the side so that you can set multiple settings at a certain depth / number of degrees.

On the other side I made a knob with which you can determine the speed of the upper blade.

The whole is fed on a 200 bar hydraulic unit.




Staal zoals vertrouwd: https://www.ijzershop.nl/
verf zoals vertrouwd: https://www.motip.com/nl/
Lastafel: https://lastafelshop.com/
Lasapparatuur: https://www.laskar.nl/home.aspx?redir...


Facebook:   / abcustomsproject  
Instagram:   / ab_customs_projecten  
Website: https://www.ab-customs.com/

Muziek via https://www.epidemicsound.com/referra...