Anet A8 CURA setup

In this video, I am explaining how to setup CURA for slicing 3D models for the Anet A8. This was a request from the comment section of one of the last videos. Have fun!

*** Get the Anet A8 here
https://geni.us/aneta8

*** Cura Start GCODES:
G28 ;Home
M117 Auto level...
;G29 ;auto level. enable only if you have a probe!
G1 Z15.0 F6000 ;Move the platform down 15mm
G0 X0 Y0 F9000 ; Go to front
G0 Z0.4 ; Drop to bed
G92 E0 ; zero the extruded length
G1 X40 E25 F500 ; Extrude 25mm of filament in a 4cm line
G92 E0 ; zero the extruded length
G1 E-1 F500 ; Retract a little
G1 X80 F4000 ; Quickly wipe away from the filament line

M117 Printing...

*** Cura End GCODES:

G4 ; Wait
M220 S100 ; Reset Speed factor override percentage to default (100%)
M221 S100 ; Reset Extrude factor override percentage to default (100%)
G91 ; Set coordinates to relative
G1 F1800 E-3 ; Retract filament 3 mm to prevent oozing
G1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely
G90 ; Set coordinates to absolute
G1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal
M84 ; Disable stepper motors

THE PRINTERS I USE: https://kit.co/danielcrosslink/the-3d...
MY MERCH: https://crosslink.io/shop

BECOME A PATRON:   / crosslink  
CHAT ON DISCORD:   / discord  

BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - [email protected]

FOLLOW ME:
INSTAGRAM -   / danielcrosslink  
TWITTER -   / danielcrosslink  
FACEBOOK -   / danielcrosslink  
WEBSITE: https://crosslink.io

The Music I use: https://crosslink.io/es, AMAZING for YouTubers!

GEAR USED
https://kit.co/danielcrosslink/my-vid...

Disclaimer: As an Amazon Associate I earn from qualifying purchases.