If you want to try latest StealthBurner:    • Printing VORON StealthBurner using en...  

Part2 - assembly and test print:    • Video  

Things you need to build a Voron Afterburner for Ender 3 v2
1. Printed parts (almost free if you print by yourself)
2. A slim (20mm) step motor (around AU$16.00). You may still use the stock extruder motor if you don't worried about the decreased build height and you also need to cut out the shaft around 2-3mm
3. BMG Extruder internal parts or a BMG Extruder (around AU$30.00)
4. Required Screws and Nuts Kit (less than AU$7)
5. 4020 24v blower Fan (part cooling) The Stock 4010 blower does not work
6. 4010 24v DC Fan (hot end cooling). You may still use the stock fan if noise is not problem to you :)

*Afterburner mounting plate for Ender 3 v2*
afterburner-motor-plate-ender3v2-Mod.STL (https://www.thingiverse.com/thing:476...
, As shown in the video, ***but later I found "afterburner-motor-plate-ender3-abl-2.stl" is the latest version, please use the latest version from https://cdn.thingiverse.com/assets/cb...)
!!!They don't fit my ender3 v2 plate very well, I have to use a drill to open some holes...
Other alternatives:
- https://www.thingiverse.com/thing:510...
- https://www.thingiverse.com/thing:502...

*Extruder*
https://github.com/VoronDesign/Voron-...
[a]_connector_cover.stl
[a]_guidler.stl
[a]_latch.stl
[a]_latch_shuttle.stl
extruder_body.stl
extruder_motor_plate.stl (only required if you use this plate https://www.thingiverse.com/thing:510...)

*Blower housing (aka, print cooling fan duct)*
https://github.com/VoronDesign/Voron-...
[a]_blower_housing_front.stl
blower_housing_rear.stl

*Printhead (hot end mount) for Ender 3 v2 stock hot end*
https://www.thingiverse.com/thing:485...
AB_Mk8_Ender5_stock_Back.stl
AB_Mk8_Ender5_stock_Front.stl
This is designed for Ender 5, but you can still use it for ender 3 v2, because both the Ender 3 V2 and the Ender 5 come equipped with a standard Creality hot end.
If you are using an hot end such as E3D_V6, Slice_Mosquito... print the required ones from https://github.com/VoronDesign/Voron-...

*Hot end cooling fan mount*
https://github.com/VoronDesign/Voron-...
hotend_fan_mount.stl

*BL touch mount*
https://www.thingiverse.com/download:... from https://www.thingiverse.com/thing:463...

*BMG Extruder internal parts*
https://www.aliexpress.com/item/40000...
Alternatively you can use parts from any BMG Extruder clones

*Screws and Nuts Kit*
https://www.aliexpress.com/item/10050...
Plus M3x10 (2) M3x6 (1)

*Nema 17 stepper motor (20mm)*
https://www.aliexpress.com/item/10050... or
https://www.omc-stepperonline.com/nem...