I demonstrate how to change out a bent axle from the rear wheel of a mountain bike I was working on. The wheel seemed out of true, but after looking closer, I realized the axle was bent. The wheel had a weird wobble. I took apart the hub, cleaned all the parts, replaced the bent axle with a new one, lubed everything and put it all back together.

Common (not complete) axle diameters/threadings:
Front solid axle 5/16" x 24 TPI
Front QR axle 9mm x 1mm thread
Rear solid axle 3/8" x 24 or 26 TPI
Rear QR axle 10mm x 1mm thread

Some of the tools used:
Dualco Mini Grease Gun:
http://www.amazon.com/exec/obidos/ASI...

Park Tool Spoke, Bearing, and Cotter Gauge - SBC-1:
http://www.amazon.com/exec/obidos/ASI...

▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy

👍 And please give my video a thumbs up 👍

▶FACEBOOK.com/RJTheBikeGuy
  / rjthebikeguy  

▶TOOLS
http://www.rjthebikeguy.com/tools

▶SHIRTS
http://bit.ly/RJBikeGuyShirts

▶WEBPAGE
http://www.RJTheBikeGuy.com