Free STL Files: https://www.shark.aero/downloads
Free STL Files: https://www.thingiverse.com/thing:286...
Free Tires STL: https://cults3d.com/en/3d-model/tool/...
Free TPU Hinge STL: https://cults3d.com/en/3d-model/tool/...

Propeller Wall Art: https://cults3d.com/en/3d-model/art/p...

FlashForge Guider 2s Printer: https://www.flashforge.com/product-de...

Sequre Soldering Iron: https://sequremall.com/collections/so...

This is a 1/8 scale RC Shark Aero. Wingspan is 990mm Length 856mm with a takeoff wight around 950-1000 grams depending on battery and with or without gear. This has a very efficient wing so the flight time is longer than I have seen on most 3D printed airplanes with a flight time of around 8-10 min.

Thank you so much for watching!

If you like videos like this, consider buying me a coffee, it really supports me: https://www.buymeacoffee.com/troymcmi...

See what else I am working on:   / troymcmillan_rc  
  / troymcmillan_rc  

#3DPrinted,#RCAirplane, #ItFlies

0:00 Free 3D Printed Plane STL Shark How to build
03:13 Flashforge Guider 2s Printer review and set up
07:42 RC Shark fuselage assembly
09:57 How to paint PLA plastic parts
13:29 RC Shark wing assembly
21:10 Sequre soldering iron review and how to use

Supplies required for this Build:
2x8mm Screws: https://amzn.to/2Tp9tpP
4x ES08Mll Servos: https://amzn.to/3iBfx9E
Or 4x Cheap servos: https://amzn.to/3ggbNsp
3530 1100kv Motor: https://amzn.to/3pIAjFy
30amp ESC: https://amzn.to/3xgNeRW
3S 2200mah Battery: https://amzn.to/3cyOBDo
4S 2200mah Battery: https://amzn.to/3geIPJq
9x6 prop: https://amzn.to/3gcPdki
8x8 prop: https://amzn.to/35gH3B2
Silver PLA: https://amzn.to/3vmukru

3D Printers I use and recommend:
FlashForge Guider 2s Printer: https://www.flashforge.com/product-de...
Artillery Sidewinder 3D Printer: https://amzn.to/396eqIp
Artillery Genius 3D Printer: https://amzn.to/39cA6CZ
Ender3 V2: https://amzn.to/2SmLOGk
Twotrees Sapphire-PRO: https://amzn.to/3wtNOLz
Anycubic Mega X Printer: https://amzn.to/3f4oS89
Fokoos Odin-5: https://amzn.to/3fAES06

3D Printing Filament:
ABS: https://amzn.to/3xgLI2c
Silver PLA: https://amzn.to/3vmukru
Overture White PLA: https://amzn.to/3facD9A
TPU: https://hobbyking.com/en_us/esun-tpu-...

Tools and Supplies used:
Spektrum DX6 Controller: https://amzn.to/3l6NFsD
Receiver: https://amzn.to/3j4PbK4
Battery Charger: https://amzn.to/3vejwfL
Charge cable: https://amzn.to/34lOk3q
XT60 connector: https://amzn.to/3iyZWnf
Assortment of 3-Pin Extension Cables: https://amzn.to/3l1xNYt
Z-Bend pliers: https://amzn.to/34mA0rt
2mm push rod ends: https://amzn.to/3nnjD4U
CA Glue: https://amzn.to/2J8EvNW
CA Accelerator: https://amzn.to/3fpbycz
Low-Voltage Tester: https://amzn.to/2Yk0A0w
Hot knife: https://amzn.to/3nrCwUH
Drill Bits: https://amzn.to/3nIJzrx
Hobby Knife: https://amzn.to/3eYOYJq
#11 blades: https://amzn.to/3vTJZ2W
Z-Bend pliers: https://amzn.to/34mA0rt
Build Mat: https://amzn.to/3vJmauw
Onboard Camera: https://amzn.to/3rp2OrH
Lead weight: https://amzn.to/3cFnzeu

These setting are for a direct drive printer you will have to adjust the retraction setting for a bowden tube style printer. Also if you print setting can be different with different printer filaments.

3D Printer Settings;

Quality:
Layer Height – 0.2
Line Width – 0.4
Shell:
Wall Line Count – 1
Infill:
Infill Density – 0
Material:
Printing Temperature – 230
Build Plate Temperature – 60
Flow – 102
Speed:
Print Speed – 40mm/s
Outer Wall Speed – 40mm/s
Inner Wall Speed – 60mm/s
Travel Speed – 120mm/s
Travel:
Enable Retraction – Checked
Retraction Distance – .8
Retraction Speed – 35mm/s
Retraction Extra Prime Amount – 0.2
Combing Mode – off
Cooling:
Enable Print Cooling – Checked
Fan Speed – 100%
Mesh Fixes:
Union Overlapping Volumes – NOT Checked
Special Modes:
Surface Mode – Normal
Experimental:
Slicing Tolerance – Middle









Disclaimer: I am sponsored by some of the products I mention. However, all of my opinions are my own. Some of the above links are affiliate links, that does not effect the price you pay for a product, but I may receive a small commission if you make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!!