In this video, I show you how to replace the torque converter seal on this 4r70w transmission in my 1995 Ford F150. The seal only leaked during the winter when I would start or turn off my truck. I believe the seal deformed due to overheating. I didn't replace it with a Viton seal though. So far it is leak free. First, you will need to remove your transmission. Once the transmission has been removed, you can access the TC seal. Using a seal puller, pry at the seal and it should come loose. Clean up the seal area and make sure it is free of old RTV and dirty. Apply 500 degree fast drying RTV to the outer and underside of the seal. Then set the seal over its seating area. Using a 2-1/2 pipe CPVC conduit, tap the seal into place until fully seated. Once the seal is fully installed, clean up the extra RTV and that's it.

#fordf150 #obsford #diy #torqueconverter

🚧 Links:

Seal puller - https://amzn.to/3PVUgEx
Black RTV - https://amzn.to/3AQDFxE

⏰ Time Stamps:
0:00 Intro
0:14 Remove your transmission link
0:27 Special tool - seal puller
0:33 Removing/pulling the torque converter seal
1:13 Important prep details
1:20 Gasket and RTV sealer usage
2:20 Installing the TC seal
2:45 Home made seal installation tool
2:55 Seating the seal in place
3:25 Seal installed
3:37 Final steps
3:55 Conclusion

Welcome to The Minute Masters YouTube Channel where I (Stevie) show you how to repair and upgrade all Ford F series trucks and Broncos from 1980-1997. So hit that subscribe button and be ready to resurrect your baby!🤙

Check out the channel merch store - https://minutemasters.bigcartel.com/

🔥Subscribe here:    / theminutemasters  
Links to my favorite product producers:
- https://desolatemotorsports.com/
- https://www.bubbarope.com/
- https://donttellmywiferacing.bigcarte...
- http://www.bajahidretrofits.com/

The project is my 1995 Ford F150 XL 2wd 8 foot bed.

🛍 As an Amazon Associate I earn from qualifying purchases.