Today we are fixing the broken antenna on our 2013, 2014, 2015 and 2016 Ford Fusion using a great little unit from Visual Garage - https://shop.visualgarage.com/

Repair at your own risk – not liable for any issues resulting from installation or damages caused to vehicle.

These come paint matched to your vehicle and are quick and easy to install with a few basic items; check out their website as they have many different OEMs available.

Connector we used to attach the wiring to the car:
TICONN Heat Shrink Connectors - https://amzn.to/488UQst
TICONN Wiring Connector Kit - https://amzn.to/47a63Yn
Wire Connector Kit - https://amzn.to/3Ep3wgs

By using my Amazon affiliate links I may receive compensation for purchases through these links at no additional cost to you.

Tools we needed normally would have been a Phillips head screwdriver to attach the antenna wire lead to the OEM antenna, but since that was broken off of the OEM antenna we had to improvise a little which you will see in the video. The rest of the tools were basically a microfiber cloth to dry wipe the surface of the paint, a hair dryer which we did not need because the car was already nice and warm, some Dawn dish soap and water to remove the wax from the paint surface, and finally some alcohol as a final prep and some masking tape.

Please perform this installation at your own risk and we are not responsible for any issues or damages caused to your vehicle - thanks for watching and have a great day.