Let's see what you need to know about swapping potentiometers on guitars and basses.
There's the obvious part: shaft length, if you need a 250k, 500k or 25k pot, etc.
There's something else though, that many seem to forget... The shaft width.

Check out the video for details. Enjoy Guitar Tech Tips! :)

Gear used: http://tho.mn/cfkyi
We use Triad-Orbit stands for our cameras, lights and mics: http://tho.mn/triad
Recorded and mixed with Universal Audio: http://tho.mn/xuad

Interesting bits and pieces:
0:00 Introduction
0:38 Two standard shaft widths
1:06 Let's change this potentiometer
1:42 The soldering iron
2:15 Don't drill from the inside
3:19 Wiring the new pot
5:35 Check if it works
5:47 The old knob will not fit anymore
6:07 Time for a test ride
6:36 Outtakes


Webshop: https://www.thomann.de
Facebook:   / thomanninternational  
Twitter: @thomann   / thomann  
Instagram: @thomann.music   / thomann.music  
Pinterest:   / thomannde  

Visit our blogs:
GER: https://www.thomann.de/blog/de/
ENG: https://www.thomann.de/blog/en/
FRA: https://www.thomann.de/blog/fr/
ESP: https://www.thomann.de/blog/es/
ITA: https://www.thomann.de/blog/it/
NED: https://www.thomann.de/blog/nl/
FIN: https://www.thomann.de/blog/fi/