We are going over the steps to drill and install an aftermarket spoiler on a 2018 Ford Mustang EcoBoost. The will include making a drilling template and installation.

Note: Its ideal to used 3M double-sided tape in conjunction with the mechanical fasteners. The tape acts as a gasket/seal. Unfortunately, this spoiler did not come with the required tape, however it can be purchased online.

1. Step 1 (Remove Deck Lid Latch Cover) - 0:16
2. Step 2 (Remove Trunk Lid Bumpers) - 0:28
3. Step 3 (Remove Trim Retainer Pins & Trim Panel) - 0:36
4. Step 4 (Remove Rubber Plugs) - 0:56
5. Step 5 (Attach Templates to Spoiler) - 1:26
6. Step 6 (Align Spoiler Position) - 2:07
7. Step 7 (Secure Spoiler Template) - 2:39
8. Step 8 (Remove Spoiler) - 3:30
9. Step 9 (Form Dimples for Drilling) - 3:52
10. Step 10 (Drill Pilot Holes) - 4:12
11. Step 11 (Remove Drill Template) - 4:34
12. Step 12 (Drill 9/32" Holes) - 5:17
13. Step 13 (Deburr Holes) - 5:43
14. Step 14 (Drill Interior Holes) - 6:12
15. Step 15 (Clean Trunk Surface/Bare Metal) - 7:02
16. Step 16 (Paint Exposed Metal) - 7:20
17. 3M Double Sided Tape Option
18. Step 17 (Install Spoiler Screws) - 9:17
19. Step 18 (Install Rubber Plugs) - 10:10
20. Step 19 (Install Trim Retainer Pins & Trim Panel) - 10:17
21. Step 20 (Install Trunk Lid Bumpers) - 10:32
22. Step 21 (Install Deck Lid Latch Cover) - 10:39
23. Step 22 (Vacuum Metal Debris) - 10:44
24. Show it Off! - 10:55

Products Used:
This video contains affiliate links for which I may receive compensation.
Trim Removal Tool Set - https://amzn.to/35Lry84
Center Punch/Stepper Bits - https://amzn.to/3K70pLt
Paint Marker Pens - https://amzn.to/345kuTd
Deburring Tool - https://amzn.to/3lJXmif
Painter's Tape - https://amzn.to/3MvGM1b
91% Isopropyl Alcohol - https://www.walmart.com/ip/Equate-91-...
Semi-Permanent Threadlock - https://www.harborfreight.com/02-oz-r...
Black Nitrile Gloves - https://amzn.to/3lps6Vo
Card Stock - https://amzn.to/3v2Neq2
Hole Punch - https://amzn.to/3PqNZ44

Tools:
Trim Removal Tool Set
1/4" Socket Wrench
4mm Socket
4mm Allen Key
Painter's Tape
Drill
Center Punch
1/8" Drill Bit
Stepper Drill Bits
Deburring Tool
Semi-Permanent Threadlock
Touchup Paint
Paint Marker Pen (Optional)
91% Isopropyl Alcohol
Microfiber Cloth
Shop-Vac
Card Stock
Hole Punch
Scissors

#GT500 Spoiler #SpoilerInstall

Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.