I will show you every line in Cura for all my LW-PLA settings. To print PLA just change the temp to 215c and 100% Flow rates. I will also show the difference between ColorFabb LW-PLA and eSun eLW-PLA.

Thank you so much for watching!

Propeller Wall Art: https://cults3d.com/en/3d-model/art/p...

If you like videos like this, consider buying me a coffee, it really supports me: https://www.buymeacoffee.com/troymcmi...

See what else I am working on:   / troymcmillan_rc  
  / troymcmillan_rc  

#3DPrinted,#RCAirplane, #ItFlies

ColorFabb LW-PLA: https://colorfabb.com/lw-pla-natural
eSun ePLA-LW: Coming Soon
Plane Print Notes: https://www.planeprint.com/notos

LW-PLA Setting
Profile 3 Cura:
Quality:
Layer Height – 0.25
Line Width – 0.4
Shell:
Wall Line Count – 1
Infill:
Infill Density – 0
Material:
Printing Temperature – 235
Build Plate Temperature – 60
Flow – 55%
Enable Retraction – Checked
Retraction Distance – 2
Retraction Speed – 30
Retraction Extra Prime Amount – 0.5
Speed:
Print Speed – 100
Outer Wall Speed – 40
Inner Wall Speed – 40
Travel Speed – 80
Travel:
Combing Mode – off
Cooling:
Enable Print Cooling – Checked
Fan Speed – 20
Mesh Fixes:
Union Overlapping Volumes – NOT Checked
Special Modes:
Surface Mode – Surface
Experimental:
Slicing Tolerance – Middle














Disclaimer: I am sponsored by some of the products I mention. However, all of my opinions are my own. Some of the above links are affiliate links, that does not effect the price you pay for a product, but I may receive a small commission if you make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!!