Today's project was to add a quick disconnect natural gas hookup to plug my motor snorkel tri-fuel converted champion 100520 generator to my home's natural gas supply. Now I have an "unlimited" generator fuel... well, that is, as long as Texas doesn't run out of natural gas again. ;-)

Tools:
Channellock 8WCB 8-Inch WideAzz Adjustable Wrench - https://amzn.to/3IjMYbE
Husky 12 inch Adjustable Wrench - https://www.homedepot.com/p/Husky-12-...
Husky 14 inch Pipe Wrench - https://www.homedepot.com/p/Husky-14-...
Husky 18 inch Pipe Wrench - https://www.homedepot.com/p/Husky-18-...


Supplies:
3/4" Full Port Ball Valve - https://www.homedepot.com/p/3-4-in-x-...
3/4" Black Iron Tee - https://www.homedepot.com/p/Southland...
Pipe Dope - https://www.homedepot.com/p/RectorSea...
3/4" Black Iron Nipples - https://www.homedepot.com/p/The-Plumb...
Sturgi-Safe ANSI Z21.41 3/4" Quick Disconnect Plug Male - https://amzn.to/3FcLz6w
Sturgi-Safe ANSI Z21.41 3/4" Quick Disconnect Plug Female - https://www.caloreequipment.com/produ...


Contents:
0:00 Introduction
0:46 Tools and Parts Used
4:06 Dry Fitting
5:26 Turning off the gas
6:15 Pipe Fitting
10:27 Leak Test
11:55 Painting
13:14 Conclusion

Tags:
#backupgenerator #diy #naturalgas #prepping