McLaren MP4-12c Oil Change. Should be the same for the 650s and possibly similar for other 3.8L Twin Turbo McLaren Engines.
#ad
Parts:
Oil Filter:
href="https://www.amazon.com/Mahle-OX254D3-...
#ad
Oil filter housing socket 36MM:
https://www.amazon.com/Ibetter-6-Poin...
#ad
14MM Aluminum Crush Washer Aluminum Oil Tank:
https://www.amazon.com/Prime-Ave-Alum...
#ad
18MM Engine Oil Plug Copper Washer:
https://www.amazon.com/Copper-Washers...
#ad
9/16 x ¾ x 3/32 Oil Line O-ring:
https://www.harborfreight.com/225-pie...
#ad
Mobil 1 0w40 7.2 Quarts (6.8L) Start with adding only 6 to 6.5 quarts
https://www.walmart.com/ip/Mobil-1-FS...


Tools:
19MM Socket (Aluminum Oil Tank)
T50 torx Socket (Engine Oil Plug)
8mm Wrench (oil line bolt)
Flat Head Screw Driver (for oil line)
Pick tool (to remove old o-rings)
36MM Oil Filter Housing Socket
Ramps (a lift if your lucky)
Jack and Jack stands. Jack Point Jack stands are pretty amazing, check them out here if you want a set. http://www.jackpointjackstands.com/
Rubber Glvoes
Paper Towels
Oil Drain Pan that holds at least 8 Quarts

Torque specs:
Aluminum Tank Drain Plug = 13 Ft/Lbs or 156 in/lbs or 18NM
Engine Oil Plug = 18 Ft/Lbs or 216 in/lbs or 25NM
Oil Filter housing = 18 Ft/Lbs or 216 in/lbs or 25NM
Oil Line Bolts = For me I just snugged with wrench
Engine Tray cover = For me just sinched with my impact not too crazy.