Part 1, Denali D3 lights, complete install on my BMW R1250GS-see update below too 🤪
GSD321 GSD321
10.8K subscribers
24,673 views
0

 Published On Nov 11, 2022

UPDATE:
I have spoken with DENALI and they confirm that using the extension leads as mentioned below is perfectly fine. You can also use there other cable extensions, the ones with double plugs on the end.

ORIGINAL DESCRIPTION
I am no expert folks , If In doubt , seek professional advice👍This is how I fitted the D3’s to my 2022 GS. Enjoy 😊

Denali D3's have been out for a little while now.

I prefer the "ROUND" light as opposed to the "SQUARE" D4. So no adverse comments please!

The hybrid lens is street legal in the USA and Europe and the spot lens is "E" marked, so I believe it is street legal in Europe and the UK?

The spot lens, when installed, has a great reach, MORE than the D7, have a look at the in-house Denali video on this    • Best LED Motorcycle Light? - DENALI D...  

I already have the HexEzcan installed, so to fit the lights , take all panels off, route cables etc will take about 2 hours(not 1 hour and 15 minutes as I say in the video!!)

Once installed , very easy to programme the lights via a laptop using the Denali app.

Cost, for the pair of D3's, 4 extension cables and the light mounting for the crash bars was £469.

Take your time , fairly simple to install.

Just got to take them out for a night ride to adjust the lights .

All items sourced from Nippy Normans:
https://www.nippynormans.com
X2 Denali D3's
X4 Denali light harness extension leads, measuring 60 cm each
X1 Pair of Denali crash bar light mounts (22-28mm)

Further info from:
https://denalielectronics.com

CHAPTERS BELOW FOR EASY ACCESS
00:00-04:31 Introduction-what was needed for the install.
04:31-05:41 What's in the boxes?
05:41-09:23 Swapping the lens over to Hybrid and a closer look at the D3's internals.
09:23-14:22 How to remove all the bikes panels for better ease of access for cabling
14:22-14:50 Screw management ! handy tip.
14:50-17:55 Cable routing right side
17:55-20:32 Cable routing left side
20:32-22:40 Do the lights work? Putting things all panels back.
22:40-25:56 Programming the D3's via laptop
25:56-28:27 So, what can the lights do. final thoughts etc.

NIGHT RIDE TO FOLLOW.........

show more

Share/Embed