Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate...

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/


---

I'm doing a list video! 65 Tech Tips for FPV Pilots! You'll know about some of these, but I bet most of them will surprise you!

For more info about these tips...

#7 - Why two omni antennas work better sometimes
   • Why two omni antennas vs. omni and pa...  

#18 - How to set up Crossfire LQ / RSSI in Betaflight
   • How To Set Up Crossfire LQ and RSSI i...  

#19 - Crossfire emergency update procedure
https://kamikatze-fpv.de/tbs-crossfir...

#24 - Props-in vs. Props-out
   • Props-In (Standard) vs. Props-Out (Re...  

#25 - How to set up a Prearm mode
   • Learn To Build a Racing Drone - Part ...  

#25 - How to set up 2-switch arming
   • Safer Switch Arming on FrSky Taranis  

#33 - How to do the L1 inductor mod
   • Fix Rapidfire Low Power UPDATED VIDEO...  

YOU ALSO NEED TO DO THE SAME MOD TO THE L10 INDUCTOR. The L10 inductor is on the top side of the DVR board, on the left side of the board. The DVR board is in the top half of the goggle shell. The L10 inductor is quite large and I recommend simply jumper-ing it with a wire, instead of trying to remove it.

#34 - FPV flight line best practices
   • FPV Video Channel Interference Best P...  

#36 - How to set up all your aircraft on the same model
   • FRSKY TARANIS HOW-TO | Model Match | ...  

#55 - How to set up turtle mode
   • Turtle Mode & ESC Beeper | BETAFLIGHT...  

#57 - How to remove ratchet from Taranis
   • How to remove the throttle ratchet fr...  

#64 - How to build a smoke stopper
   • Why you need a smoke stopper | HOW TO...