Seriously, the basic upgrade probably takes about 3 hours, which isn't bad going from scratch. If you have marlin experience already then you might even get it down to an hour and half. Well worth doing.

If you want to buy a biqu / BTT board (or any other product!), the link below will also help the channel (affiliate link):
https://shareasale.com/r.cfm?b=189092...

Disclaimer: Board and drivers were supplied by Biqu/BTT at no cost, under no presumption of services from me, and definitely not in exchange for any positive view of the product, views are my own, etc etc. I do not benefit in any other kind other than the affiliate link above.

If you need any HELP with following this process then hop onto discord below where I or our growing community will try to assist!

Join us on Discord! There are many of us now! Hundreds! (250+ on last count!!)   / discord  

Please consider supporting the channel to allow me to destroy mo..I mean make more content:
  / lostintech  

- The calibration model shown in the video has been given to patrons free of charge -

Links:
Manual and setup files for this board: https://bigtree-tech.com/pages/download

Teaching tech's case: https://www.printables.com/model/1801...

Klipper: https://www.klipper3d.org/Installatio...
Really useful article I forgot to mention: https://3dprintbeginner.com/hotend-an...

I promised a link to the crimping tool but I can't find a reliable source, the ones I use are the "engineer PA-09" but also if you can find "iwiss" branded ones then bigclive swears by those and they are cheaper (amazon sku code B08BCFQCW3).

Forgot anything? Let me know. Need help? Join discord (see above)