Customer States Clunking Noise After Installing Aftermarket Wheels
Just Rolled In Just Rolled In
586K subscribers
613,705 views
0

 Published On Mar 25, 2024

Submit clips and photos that you personally took on our website!
https://www.justrolledinyt.com/
👉(Not all content sent in will be used and it MUST be yours)👈

Just Rolled In Merch (all profit from merch sales donated to local foodbank)
https://www.justrolledin.shop/

👉Follow Just Rolled In on Social Media👈
Facebook -   / justrolledin  
Instagram -   / justrolledinyt  
TikTok -   / justrolledin  

Credit:
  / despicablemechanics  

These videos are meant to be educational and funny, so if you have any questions don't hesitate to ask!

0:00 Intro.
0:05 "When I asked the customer what was going on with that setup, he said he wanted to fit a JDM wheel with 5x114.3mm PCD. His car originally came with a 4x100 PCD (Pitch Circle Diameter). The owner refused to change the hub to a proper 5x114.3mm or get it fixed even after our explanation about safety so we refused to touch the car, reinstalled the wheel and he drove away."
0:20 The driver-side far left vent was closed.
0:30 The oil pressure relief/bypass valve that was in the wrong spot prevented the engine from having any adequate oil flow through the rest of the engine and was ran like this by the customer.
Last he heard the customer still hasn't got the engine fixed or replaced.
0:57 Factory coil springs need to be removed after installing aftermarket coilovers.
1:09 "This Ford Ka was brought into our shop to change two front tires and some brake work and a pre-ITV inspection (If its road worthly) is when we noticed this custom Horn switch the customer had fabricated themselves."
1:15 Customer didn't know the transfer case was in Neutral. The transfer case was put into 2HI and it fixed their issue.
1:27 "A couple purchased a Mini from a local dealership with a bouquette of issues, that was probably the most minor one. Just another reason to do a pre-purchase inspection.
1:37 House keys the customer tied near the steering column made the noise the customer heard.
1:44 No extra info.
1:50 New brake pads and brake rotors were installed.
2:03 No extra info.
2:14 The engine shuts off when the auto start/stop feature is engaged and that's why the oil pressure goes to zero. No problem found.
2:21 The technician said it needed a ton of other work as well that was not performed.
2:32 Didn't take much to crack the plastic transmission pan on this Ford Bronco. The customer had it replaced.
2:40 A good reason to read the owner's manual.
2:52 This Mercedes-Benz had quite a strong smell to it from all of these "air fresheners" the customer had in their car.
3:10 Outro. Thanks for watching!

show more

Share/Embed